High-resolution color camera
TK-S920
CCD 1/3 type, switching type / DC12V multiple coaxialachieve high-quality monitoring in the book 535 horizontal resolution. High-resolution color video camera compact &, TK-S920.
Dimensions of TK-S920
■ Exterior Dimensions (Unit: mm)
■ Rear View
■ Left Side View
Key Features TK-S920
■ high image quality of 50dB S / N ratio and high resolution horizontal resolution of 535 books. You can give full play to the performance of the hard disk recorder.
■ employ approximately 380,000 effective pixels, the high sensitivity CCD Type 1/3, achieved a 1.5 lux Minimum Illumination (output, 50% F1.2, AGC ON).
■ Do also supports C / CS mount, a DC Iris / Video Iris, versatile lens can be selected.
■ White balance (set / one-push automatic tracking), (1/60, 1/100), featured various adjustments, such as AGC (ON / OFF) Backlight Compensation (ON / OFF), electronic shutter. I respond to a wide range of installation conditions in a variety of situations.
■ Use of metal cabinet to achieve high durability.
■ Supports two power supply system / DC12V multiple coaxial.
Key Specifications TK-S920
| Imaging device | Type Interline Transfer CCD 1/3 |
| Effective pixels | Approximately 768 380 000 pixels (vertical) × 494 (horizontal) |
| Imaging area | 4.8 mm × 3.6 mm (horizontal) (vertical) |
| Television system | Conforms to NTSC |
| Color imaging system | Sequential method color difference veneer |
| Scanning frequency | 15.734 kHz, Vertical: Horizontal: 59.94 Hz |
| Synchronization scheme | External synchronization / internal synchronization (special signal from the CCU to camera output dedicated multiplexed, with three-stage switching system phase adjustment) |
| Video output | Camera output: VB 0.85 V VBS 1.0 V (pp), 75 Ω, BNC or (pp) monitor output: VBS 1.0 V (pp), Hi-Z, pin jack |
| Resolution | Book 535, Vertical: Horizontal: 350 this |
| S / N ratio | 50 dB |
| Minimum illumination | (F 1.2, AGC ON output, 50%) 1.5 lx (output, 25% F 1.2 AGC ON) 0.75 lx |
| White balance | Setting automatic tracking (ATW) / One Push (AWB) |
| AGC | OFF / ON (26 dB) |
| Electronic Shutter | 1/60 seconds (standard), 1/100 sec (Flickerless lighting 50 Hz) |
| Auto iris lens output | Switching mode DC / video, 4P connector (JEITA RC-5204 compliant) DC: 1 kΩ braking standard / maximum, 25 mA 0.5 V ~ 4 V drive Video: 0.7 V (pp), DC 9.5 V |
| Backlight Compensation |
With it (on / off)
|
| Enhancer | Horizontal, with both vertical |
| Extended distance cable | Up to 500 m between the camera-CCU (when using 5C-2V) |
| Lens Mount | CS mount / C mount (adjustable flange back) |
| Power | / DC12 V, screw terminal (compatible with multiplexed dedicated CCU to camera output) DC15 V ~ 21 V |
| Quiescent current | 230 mA (CCU) / 260 mA (DC 12 V) |
| Ambient temperature | -10 ℃ ~ +50 ℃ (operating), 0 ℃ ~ +40 ℃ (recommended) |
| Physical Dimensions | (D) (height) (width) 51 mm × 58 mm × 126 mm |
| Mass | About 370 g |
| Finishing | Body: approximate 3.5Y-7/0.7 Rugure Bae, Mansell, B22-75B approximation JPMA (2003) based Approximation: 1.5Y-2.5/0.2 dark gray, Munsell, BN-30 approximation JPMA (2003) |
| (Material appearance) | SPCC over t0.8 (iron), etc.: cover the camera mounting bracket: PBT + ABS (plastic) |
| CCU fit | For example, TK-F400 TK-U1003, TK-U1004, TK-U1005, TK-U1402, TK-U1801, TK-F600B, TK-W400, TK-W410, TK-D700 |
| Fit power | AA-P700 (sold separately) |
Note 1: DC12V Operation monitor output is not output.
Are not insulated from the GND of the power supply of the camera output and GND DC12V: 2 Note.
Noise may occur or drive multiple cameras in a single AC adapter, or when the AC adapter connected to ground GND.
Are not insulated from the GND of the power supply of the camera output and GND DC12V: 2 Note.
Noise may occur or drive multiple cameras in a single AC adapter, or when the AC adapter connected to ground GND.